-
By product category
-
Search by product
- SR3000-5G
- SR3000-5G-Ruggedized
- SR3000
- SR3000-lite
- T5100
- T5300
- FWR7302
- FWR9601
- FWR8102
- PR08
- LM150
- G504
- G508
- FTA1101
- FTA5102E2
- FGW4148-16S/24S/32S/48S
- FIP16
- FIP15G
- FTA5101
- FWR9502
- FWR8101
- FWR7102
- P23G/P23GW
- P22G
- P22P
- P21/P21P
- P20/P20P/P20G
- P23GW (3.5")
- P11W
- P10W
- P11/P11P/P11G
- P10/P10P/P10G
- FIP16Plus
- FIP15G Plus
- FIP14G
- FIP12WP-R
- FIP13G
- FIP12WP
- FIP11C/FIP11CP
- FIP10/FIP10P
- P11LTE
- P10LTE
- i12/i12V
- i11/i11V
- i86V-01/02
- PB01
- i86-01/02/03
- FTA5111
- HB01 & USB433
- FTA5120
- HP200
- BT50
- EHS10
- FPX9102H
- FRPS
- FACS
- FDC
-
Find by question type
How to use port vlan
Dec 11, 2020
1. Web page port VLAN page is configured here as PVID, where you specify which port's PVID.
For example: here specify WAN: 1, meaning only VLAN; 1 can specify the WAN for the untag, if the other VLAN set up untag will be given, as follows：
This is a normal prompt, LAN 1,2,3,4 PVID is 2, the same other VLAN can not set the corresponding port is untag
2. For example, you need to send broadcast messages from LAN1, LAN2 can receive, LAN 3 can not receive
1)port vlan_ carry tag, can be configured as follows:
LAN1 can send broadcast packets, LAN2 can receive tag packets carrying VLAN 10, if the message port vlan carry tag.pcap
2)port vlan_ does not carry tag.png
LAN1 can send broadcast packets, LAN2 can receive no tag broadcast message, if the message port vlan does not carry tag.pcap
Back to list
